4-Channel Compact Digital Amplifier featuring Bluetooth KS-DR2104DBT

$349.95

Category:

Description

THIS AMP WILL NOT WORK FOR SUBWOOFERS

 

4-Channel Compact Digital Amplifier featuring Bluetooth for Compact Car, Marine, UTV and Motorcycle / Max Power 600W / 50W RMS x 4 @ 4 ohms

IPX6: Protection against Powerful Water Jets / Water projected in powerful jets, up to 12.5mm (0.49 inch) against the amplifier from any direction shall have no harmful effects.

IPX7: Protection against Immersion, up to 1 m (3 feet, 3 inch) depth / Restricts harmful amounts of water entry when the amplifier is immersed in water under defined conditions of pressure and time, up to 1 m (3 feet, 3 inches) of submersion.

IP6X: Effective against Dust-tight / Dust entry is restricted to avoid damage to the amplifier.
A Drain Tunnel Structure is employed for creating a gap between the amplifier and the installation surface. This prevents saltwater and sand from accumulating on the bottom, increasing corrosion protection.
Saltspray-proof: ASTM B117 salt spray (or salt fog) corrosion test simulates harsh conditions in a saltwater environment to ensure the amplifier does not corrode or fail in these harsh conditions.
By adopting the Corrosion-Resistant Sealed Cast Aluminum Chassis and stainless-steel screws resistant to rust and corrosion, this amplifier achieves the highest level of durability in its class.

Vibration-proof: Vibration can be damaging to amplifier if it is not designed to withstand it. This amplifier passes a 3-axis multi-frequency vibration test.

The amplifier mounting section is made of 15/64 inch die-cast material to suppress the amplification of vibration. In addition, the thick heat-transfer sheet was also placed to the substrate and the Aluminum die cast heat sink to suppress the vibration of the substrate.

This premium Bluetooth solution delivers high-quality wireless audio performance for aptX and AAC codecs.
Enhanced fine-tuning controls are available for installation and setup flexibility.
Amplifier
Maximum Power Output
600W
Rated Power Output: Stereo (4Ω)
50W x 4 (20Hz–20kHz, ≤1.0% THD)
RMS Power Output: Stereo (2Ω)
75W x 4 (1kHz, ≤1.0% THD)
Rated Power Output: Bridged (4Ω)
150W x 2 (1kHz, ≤1.0% THD)
Speaker Impedance
4Ω (2Ω to 8Ω allowable)
(Bridged connection: 4Ω to 8Ω allowable)
Frequency Response (+0, -3dB)
10Hz–20kHz
Preout
5V (Max)
Signal to noise ratio
89dB
Low pass filter frequency (–12dB/oct.)
50Hz–200Hz (variable)
High pass filter frequency (–12dB/oct.)
50Hz–200Hz (variable)
Bluetooth
Ver.5.0
Bluetooth Frequency Range
2,402GHz–2,480GHz
Bluetooth RF Output Power (E.I.R.P.)
+4dBm (Max.), Power Class 2
Bluetooth Profile
A2DP (Advanced Audio Distribution Profile)
AVRCP (Audio/Video Remote Control Profile)
Operating Voltage
12V DC car battery
Current Consumption
26A
Operational Temperature Range
-10°C – 60°C
Dimensions (W x H x D)
7-13/16″ x 1-15/16″ x 4-1/8″
Weight
1.6kg (3.5lbs)
Waterproof & Dustproof
IP66, IP67